Here you can free download E-Sys 3.28.1 and Psdzdata Lite V3.61.1 for BMW F Series Coding includes BMW F10! Tool you need: BMW ENET Cable or BMW ICOM A2.

Free download BMW E-SYS 3.28.1+ E-SYS Launcher Premium 2.7.0+ Psdzdata V3.61.1 Lite

EXTRACT PSdZDataLite - OR - PSdZDataFull.rar ARCHIVE 04) Extract the PSdZDataLite or PSdZDataFull.rar archive to produce the 'psdzdata' folder. 05) Make sure that there is an empty 'dist' folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g. Free download BMW E-Sys v3.28.1 Psdzdata Lite v3.61.1 on Mega: NO Pass tc00gSIb!QSJatG3d3e4JVaDMt2aIhw E-Sys 3.28.1 is the newest version, but not tested by OBDexpress.co.uk Official Blog OBDII EOBD Tool Tech Support & Diagnostic Software Blog.

No pass! Enjoy!

Note:

1. You must uninstall the existing E-SYS version before installingnew E-SYS 3.28.1. After installing tested it with Launcher 2.7.0 and it works.
2. E-SYS Launcher Premium V2.7.0 Build 132(require NET Framework 4.5.2 or later)
3. E-SYS Launcher Premium V2.7.0info

Added cheat code selection

Change Code Default Values button name to DO NOT USE!!! (VERWENDEN SIE KEINE!!!)

Windows XP support again

Minor bug fixes

For Newest BMW E-sys software,please check here:

BMW F Series F10 Coding Guide

Preparation

1.Hardware

A laptop PC with Windows OS: It doesn`t matter what OS version you already have installed. The software will work with any windows version.

A BMW ENET Coding Cable: Cheapest option cost only $16.99. All F series cars need this cable to do coding.

Or BMW ICOM A2: Allow you to diagnose and program more than just do coding.

BMW ICOM A2 full package without software $389

BMW ICOM A2 full package with latest ISTA 4.04.12 HDD $459

2.Software

To code BMW F10 you need both E-Sys and psdzdata. So we make you this blog!

What does this mean in simple terms?

You need a piece of software that is used to make changes to the values on your car and that software also needs data files in order to do so.

Software Installation:

How to install E-Sys? (Set E-Sys 3.26.1 as example)

Extract E-Sys using Winrar. Right click it and click “extract here”.

Run E-Sys_Setup_3_26_1_b42487.exe

Select language, click “Next” then “I accept the agreement” then “Next”.

Click “Browse” to choose where to install E-Sys. The default location is C:EC-AppsESGE-Sys.

Set the data path for E-Sys, the default is C:Data.

Click next until the installation begins.

Click “Finish” to complete the basic installation procedure for E-sys.

Then you need to make it work.

You will see two folders, one is a “Patch” the other is “Token Generator”.

The patch folder contains 2 files

Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)

Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)

Use the Token Software, enter a username as you like and password.

How to install psdzdata?

This is an important and final step of the installation process. The E-Sys installation doesn’t contain any data so you must copy the data into the right folder.

It’s recommended to use the Psdzdata “Lite” version because it has all the Firmware data removed so it saves a lot of space!

Extract Psdzdata using Winrar. Right click it and click “extract here”.

After that go to C:Data and erase the existing “Psdzdata” folder and copy this extracted new one in the same location.

1. You can use E-Sys now!

Save

E-sys 3.27.1 download and e-sys installation guide…here you go…

E-SYS download

E-Sys LAUNCHER 2.5.3.msiE-Sys 3.27.1.rar

Esys Software Psdzdata Torrent Download

Psdzdata lite download

PSdZData_Lite v3.59.5.rar BMWAiCoder v4.6

BMW e-sys cable

Spend some dollars with a working ENET cable

E-SYS installation guide

—————————————————————————————————-

EXTRACT E-SYS .rar ARCHIVE

—————————————————————————————————-

01) Extract E-Sys .rar archive to create the following 2 folders:

⦁ “E-Sys Program”

⦁ “E-Sys Documents”

—————————————————————————————————-

INSTALL bmw E-SYS

—————————————————————————————————-

02) From the extracted “E-Sys Program” folder, run “E-Sys_Setup_x_xx_x_xxxxxx.exe” to install program to default location (i.e. “C:EC-AppsESGE-Sys”)

03) When prompted, accept the default installation location Data Path (i.e. “C:Data”).

* NOTE: If upgrading from a previous E-Sys version, first uninstall current E-Sys version via Windows Control Panel.

—————————————————————————————————-

EXTRACT PSdZData_Lite – OR – PSdZData_Full .rar ARCHIVE

—————————————————————————————————-

04) Extract the PSdZData_Lite or PSdZData_Full .rar archive to produce the “psdzdata” folder.

05) Make sure that there is an empty “dist” folder in each of the psdzdata chassis folders, and if missing, create as needed, e.g.:

⦁ C:DatapsdzdatamainseriesF001F001_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesF010F010_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesF020F020_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesF025F025_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesF056F056_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesI001I001_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesK001K001_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesKE01KE01_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesRR01RR01_xx_xx_xxxodxdist

⦁ C:DatapsdzdatamainseriesS15AS15A_xx_xx_xxxodxdist

—————————————————————————————————-

INSTALL PSdZData (Lite or Full)

—————————————————————————————————-

06) If existing “psdzdata” folder exists in “C:Data” (i.e. “C:Datapsdzdata”) DELETE it.

07) From the PSdZData_Lite or PSdZData_Full extraction, copy the “psdzdata” folder to “C:Data” (i.e. “C:Datapsdzdata”)

* NOTE: If upgrading from a previous PSdZData version, DELETE old PSdZData folder and REPLACE with new PSdZData folder (DO NOT copy

(merge) new PSdZData folder on on top of old PSdZData folder).

* NOTE: PSdZData Lite Version has all ECU Firmware files removed, which are needed only for flashing new firmware onto ECU’s and which ARE

NOT needed at all for any Coding. PSdZData Full Version is needed ONLY for Programming (flashing) ECU’s with new Firmware.

* NOTE: BMW AG made changes to PSdZData beginning with 54.2 PSdZData where they removed (trimmed) all descriptive text from CAFD (and

FAFP) files, making FDL Coding of ECU’s difficult, as the FDL Codes can no longer be easily located. E-Sys Launcher Premium 2.x uses historical

CAFD data from older Untrimmed PSdZData releases to dynamically map the trimmed data back into E-Sys.

—————————————————————————————————-

INSTALL E-SYS LAUNCHER PREMIUM AND CREATE .EST TOKEN & PIN

—————————————————————————————————-

08) Run the “ESysLauncherPremiumSetup_2.0_Build_xx.msi” to install program to default location (“C:Program Files (x86)TokenMasterE-Sys

Launcher PremiumESysLauncher.exe”)

09) Run “E-Sys Launcher Premium” from Desktop Shortcut.

10) In “Path” field, press the “…” Button, and Select folder location to store Token file Path (i.e. “C:Data”).

11) In “PIN” field, enter any alphanumeric 4-12 character PIN to use with your Token file (e.g. “1234”).

12) In “Confirm” field, enter the same alphanumeric 4-12 character PIN previously entered (e.g. “1234”).

13) Press the “Generate Token” button, and wait for the “EST Software Token Successfully created at “C:DataFreeToken.est” message to appear,

and then press the “OK” button.

14) When the main E-Sys Launcher Premium window appears, press the “Abort” button at bottom of it.

15) Select the “Car Series” Dropdown box and choose your exact chassis type (e.g. F01, F06, F07, F10, F12, F15, F25, F30, F82, F83, etc.).

*NOTE: With E-Sys Launcher Premium version, once “Car Series” is set, it can only be changed every 3 days, so be sure to set it correctly during

initial installation and setup. If you do not want this restriction, you can obatain E-Sys Launcher Pro version from TokenMaster, which lacks this

* bmw esys token generator can be reached via:

http://www.eobdtool.co.uk/wholesale/bmw-enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series.html

16) After “Car Series” is properly set, press the “Launch Now!” button.

*NOTE: It will take E-Sys a while to open as it writes its the log file.

—————————————————————————————————-

CONFIGURE E-SYS software

—————————————————————————————————-

17) On E-Sys Menu Bar, select “Options” and then “Settings”:

1. A) On the “PROGRAM” Tab, set the Directories => Data: path to “C:Data”
2. B) On the “EST” Tab, set the Developer-Soft-Token => EST: path to match .est Token file created in Step 12) above (i.e. “C: Data

FreeToken.est” )

1. C) On the “OPTIONS” Tab Uncheck the boxes for “Update VCM after TAL execution” and “Update MSM after TAL execution”.

18) Press “OK” to close the Settings Diaglog Window and then from the Menu Bar press “File” and then “Exit” to shut down E-Sys application.

—————————————————————————————————-

CONNECT TO CAR WITH E-SYS VIA ENET CABLE

—————————————————————————————————-

19) Make connection from car’s OBDII port to computer LAN port with OBDII-ENET interface cable.

20) Ensure Car has adequate power and is switched on.

*NOTE: A continuous power source of at least 12.6 Volts is needed. Failure to maintain proper voltage can lead to corruption of ECU Data. As

such, ideally the car is connected to an external charger. In lieu of using an external charger, the car can instead be coded with the engine running

in order to maintain proper voltage, which is acceptable for coding all ECU’s EXCEPT the DME (Digital Motor Electronics) ECU or DDE (Digital Diesel

Esys Software Psdzdata Torrent Pdf

Electronics) ECU. The DME/DDE are typically not coded anyway, so this ECU limitation is generally not an issue.

21) Wait a few minutes until the Laptop Windows wired network adapter icon shows a Connection with the yellow exclamation point over it.

*NOTE: The car does NOT have a DHCP server, so it does NOT assign an IP Address to the computer. Both the computer and the car will go into

DHCP fallback mode, each assigning themselves a random Class-B IP Address so that they can talk to each other. This can take up to 60 seconds,

so you have to wait until the PC has an IP address before you try to connect). Class-B IP Address range is from 128.0.0.0 to 191.255.255.255.

Automatic Private IP Addressing (APIPA) is a network client-side process used as a fall-back position when DHCP services are not available on the

network but the client devices are configured to use DHCP for their IP address configuration. APIPA allows the client device to randomly choose one

of the 65,534 addresses available in the Class B network address of 169.254.0.0/16.

*NOTE: If you are running E-Sys in a Virtual Machine (VM), make sure you set the VM NIC to bridging mode. Do NOT use NAT.

22) Run “E-Sys Launcher Premium” from Desktop Shortcut to open E-Sys application.

23) On E-Sys Toolbar Press the “Connect” Button and in the “Open Connection” window under “Target”, select desired Target Vehicle based on

car’s Chassis.

(e.g. “TargetSelector:Project=F010-xx-xx-xxx, VehicleInfo=F010”)

*NOTE: Do NOT select the Target with the “_DIRECT” suffix (e.g. TargetSelector:Project=F010-xx-xx-xxx, VehicleInfo=F010_DIRECT).

*NOTE:

F001 psdzdata covers F001/F002/F003/F004/F007/RR04/RR05/RR06 (5-Series GT is an F07 NOT an F10)

F010 psdzdata covers F006/F010/F011/F012/F013/F018

F020 psdzdata covers F020/F021/F022/F023/F030/F031/F032/F033/F034/F035/F036/F080/F082/F083/F087

F025 psdzdata covers F015/F016/F025/F026/F085/F086

F056 psdzdata covers F039/F045/F046/F047/F048/F049/F052/F054/F055/F056/F057/F060

I001 psdzdata covers I001/I012

K001 psdzdata covers K010/K018/K019/K021/K022/K023/K032/K033/K045/K046/K047/K048/K049/K050/K051/K052/K053/K054

K080/K081

KE01 psdzdata covers K017

RR01 psdzdata covers RR01/RR02/RR03

S15A psdzdata covers F090/G001/G002/G011/G012/G030/G031/G032/RR11/RR12/RR31

*NOTE: If the “Open Connection” window under “Target” is empty (no targets), verify the following:

1. A) That the psdzdata chassis folders each have an empty “dist” folder (See Step 05).
2. B) That the “psdzdata” folder is installed properly (See Step 07).
3. C) That the “Directories => Data: path is set properly (See Step 17A).

24) In the “Open Connection” window under “Interface” select “Connection via VIN”.

*NOTE: If “Connection via VIN” is grayed out and Vehicle VIN is not shown verify the following:

1. A) ENET Cable connection to car is good.
2. B) Car has proper voltage (Make sure Charger voltage is at least 12.6 Volts or motor is running if car is not on a Charger).
3. C) Laptop Windows Firewall and any Antivirus software is disabled and not running.
4. D) Laptop Lan Adapter has a 169.254.xxx.xxx IP address (Make sure it is using DHCP and does not have a Static IP address assigned to it).

If “Connection via VIN” remains grayed out, close E-Sys and shut car completely off for 30 minutes, and try connection again beginning with Step19.

25) In the “Open Connection” window under “vehicle-specific parameter (optional)” select “Series, I-Step Shipment”, and leave the two

Dropdown boxes blank.

*NOTE: Do NOT select “Read parameters from VCM”.

26) In the “Open Connection”, select “Connect” button.

*NOTE: Window should pop up confirming successful connection and car can now be accessed with E-Sys.

————————-

NOTES:

————————-

1. A) Each time E-Sys is launched, the first time the FDL Editor or CAF-Viewer is invoked, either directly via “Editors & Viewers => FDL-Editor” or

“Editors & Viewers => CAF-Viewer” or indirectly via right-clicking on a module’s read CAFD and selecting “Edit FDL”, you will need to enter the EST

Token PIN.

1. B) Coding KOMBI (Instrument Cluster) module will cause the car to chime and the dashboard to reset including the clock. Simply reset the vehicle

Date and Time via iDrive when done coding module.

1. C) Coding some ECU’s can result in a variety of initial Error Messages appearing on CID Screen. This is common. Just click on “Ok” to dismiss

them, and they should NOT reappear again. If errors persist, try and clear them with E-Sys as follows:

⦁ Click “External Applications” in the left menu.

⦁ Click “External Application”

⦁ Double-click “Transmitter”

⦁ Scroll to the bottom and click “… Clear all DTCs (clear DTC,clear Infospeicher,ZFS – DM_Lock,clear ZFS – DM_Clear,ZFS – DM_Unlock) to

highlight it.

⦁ Click “Connect” button.

⦁ Click the “Send” button.

1. D) Some ECU’s take a long time before the changes begin working (e.g. trunk and mirror close). If still not working after a full hour of car being

shut off, try recoding the module again, even if it looks like the correct parameter (e.g.”nicht_aktiv”) is set.

1. E) If you want to read an ECU CAFD’s last as-coded settings (i.e. net coding data), go to the “Editors & Viewers => FDL-Editor”, put your PIN in,

and then navigate to your CAF folder (C:DataCAF) and select the desired CAFD file’s corresponding read coding data .ncd file. You do NOT needto be connected to the car.

(e.g. Module CAFD Name cafd_000000f9.caf.007_003_167 = CAFD_000000F9_007_003_067.ncd)

1. F) If you want to look at an unread CAFD file, go to the “Editors & Viewers => CAF-Viewer”, put your PIN in, and then navigate to your CAFD folder

(C:Datapsdzdataswecafd) and select the desired CAFD. You DO NOT need to be connected to the car.

(e.g. Module CAFD Name cafd_000000f9.caf.007_003_167)

G:) For known Coding Parameters, search for Coding Cheat Sheet for your chassis (e.g. F10, F30, F20, F15, etc.)

(BIG THANKS to hayk57 in the MH community)