DOWNLOADING OR USE OF MAXLINEAR SOFTWARE IS SUBJECT TO THE FOLLOWING TERMS:
MAXLINEAR MAKES NO WARRANTY, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE WITH RESPECT TO THE SOFTWARE INCLUDING ANY WARRANTY OF MANUFACTURABILITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THAT THE USE OF THE SOFTWARE WILL NOT INFRINGE ANY PATENT, COPYRIGHT OR TRADEMARK. MAXLINEAR NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE USE OR OPERATION OF THE SOFTWARE.
MAXLINEAR SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCES FOR ANY INJURY OR DAMAGE TO USER, ITS CUSTOMERS OR EMPLOYEES CAUSED DIRECTLY OR INDIRECTLY BY USER’S USE OR OPERATION OF THE SOFTWARE; PROVIDED FURTHER THAT IN NO EVENT SHALL MAXLINEAR BE LIABLE TO ANY PERSON, FIRM, OR CORPORATION FOR ANY LOSS OR INJURY TO EARNINGS, INFORMATION, PROFITS, OR GOODWILL, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGE ARISING OUT OF USER’S USE OR OPERATION OF THE SOFTWARE. USER FURTHER AGREES TO DEFEND AND INDEMNIFY MAXLINEAR FROM ANY AND ALL THIRD PARTY CLAIMS THAT MAY ARISE OUT OF OR IN CONNECTION WITH USER’S USE OF THE SOFTWARE.
| Product Family | Part Number(s) | Operating System | Driver Version | Release Date |
| USB Ethernet | XR22800, XR22801, XR22802, XR22804 | Windows XP and newer | 1.1.0.0 | December 2017 |
| USB UART | XR21V1410, XR21V1412, XR21V1414, XR21B1411, XR21B1420, XR21B1422, XR21B1424, XR22801, XR22802, XR22804 | Android | 1C | November 2015 |
| Windows XP, Vista, 7, 8, 10 | 2.6.0.0 | December 2019 | ||
| Linux 3.6.x and newer | 1C | January 2017 | ||
| Linux 2.6.18 to 3.4.x | 1A | January 2015 | ||
| USB UART | XR21V1410, XR21V1412, XR21V1414, XR21B1411 | Mac OS X | 1.0.4 | October 2013 |
| USB UART | XR21V1410, XR21B1411, XR21B1420, XR22801, XR22802, XR22804 | XRUSB1 for Win XP SP3 and newer | 2.2.5.0 | March 2016 |
| PCI UART | XR17C154, XR17C158, XR17D152, XR17D154, XR17D158 | Windows 10 | 5.5.0.0 | September 2020 |
| Windows XP, Vista, 7, 8, 8.1 | 5.3.0.0 | September 2015 | ||
| Linux 2.6.32 and newer | 2.6.0.0 | August 2019 | ||
| PCI UART | XR17V252, XR17V254, XR17V258 | Windows 10 | 5.5.0.0 | September 2020 |
| Windows XP, Vista, 7, 8, 8.1 | 5.3.0.0 | September 2015 | ||
| Linux 2.6.32 and newer | 2.6.0.0 | August 2019 | ||
| Linux 2.6.21 | 1.4.0 | July 2007 | ||
| Linux 2.6.18 | 1.3.0 | February 2007 | ||
| PCIe UART | XR17V352, XR17V354, XR17V358 | Windows 10 | 5.5.0.0 | September 2020 |
| Windows XP, Vista, 7, 8, 8.1 | 5.3.0.0 | September 2015 | ||
| Linux 2.6.32 and newer | 2.6.0.0 | August 2019 | ||
| Linux 2.6.31 | 1.1.0 | February 2010 | ||
| Linux 2.6.27 | 1.0.0 | November 2009 | ||
| I2C/SPI UARTs | XR20M1170, XR20M1172, XR20V2170, XR20V2172 | Linux 3.x.x | 1.2.0 | February 2016 |
| I2C/SPI UARTs | XR20M1280 | Linux 3.x.x | 1.0.0 | March 2015 |
PPA makes it easy to install Hauppauge TV tuners with Ubuntu. PPA's are the only way to ensure you get the latest fully updated Hauppauge drivers, no matter which Ubuntu you are running. Hauppauge's engineering team developed and maintains the PPA for our TV tuners.
Downloads Overview of suitable drivers and manuals for IDS products Knowledge Base Deepen your knowledge with TechTips, case studies, programming examples etc. Online Tools At a glance: product finder, 3D print data, frame rate calculator etc. Support & Help First-hand support for IDS products and services Product changes Information about discontinuations and product changes.
Hauppauge's PPA has support for the following models of Hauppauge TV tuners
- Driver and Firmware for Windows and Linux and Mac OS. 11 Ralink RT2571W/RT2671/RT2500 USB Wireless Driver 3.0.5.0 WHQL Windows 98SE/ME/2000/(XP/Vista x32/x64).
- Worldeyecam, INC 24551 Raymond Way, Suite 270 Lake Forest CALIFORNIA 92630 United States 888-211-2288 949-305-6550 949-305-9977.
- Question about io data GV-USB2 I have this capture device but I can't figure out how to set it up with obs to record/stream console games. I am trying to capture a gamecube game right now but no matter what source I add with obs, the screen is black or purple.
- WinTV-HVR-955Q, WinTV-HVR-935C and WinTV-HVR-975 (including analog TV)
- WinTV-dualHD (all models, both tuners)
- WinTV-quadHD (both PCIe and USB models)
- WinTV-soloHD (DVB T/T2/C)
- WinTV-HVR-1255 and WinTV-HVR-1265 (including analog TV)
- ImpactVCBe video capture (PCIe)
- USB-Live2 video capture (USB)
- Starburst 2 satellite TV receiver
- PCTV 292e triple mode TV receiver
- PCTV 461e Satellite TV receiver (both old and new models)
- WinTV-NOVA-S2 Satellite TV receiver
PPA supported Linux versions
The Hauppauge PPA supports Ubuntu versions (on Ubuntu desktop and server with 64-bit Intel and AMD processors):
- 220.04 Focal with kernel 5.4
- 219.10 Eoan with kernel 5.3
- 218.04 Bionic HWE with kernel 5.3
- 218.04 Bionic with kernel 4.15
- 216.04 Xenial HWE with kernel 4.15
- 216.04 Xenial with kernel 4.4
- 214.04 Trusty with kernel 4.4
PPA installation video with Ubuntu
click to enlarge
For other versions of Linux, you can install the Hauppauge drivers directly.
See this page for instructions.
PPA installation instructions for TV tuner driver on Ubuntu
Open Terminal in Ubuntu The easiest way to open terminal is to right click on desktop and select Open Terminal. You can also click Ctrl+Alt+T on your keyboard.
In Terminal, type the following or copy and paste the following lines, one by one, then click enter.
First, determine the version of Ubuntu you are running
To do this, run this command:
dpkg -l | grep linux-image-generic-hwe
If a line is displayed beginning with 'ii', then you are running the HWE version of Ubuntu. You will need to know if you are running HWE this in a moment when you install the mediatree.
Download the PPA
sudo add-apt-repository ppa:b-rad/kernel+mediatree+hauppauge
After this first line, click enter when prompted to add this PPA.
sudo apt-get update
If you are running an HWE version of Ubuntu, use this command:
sudo apt-get install linux-hwe-mediatree
If you are NOT running HWE, use this command:
sudo apt-get install linux-mediatree
Note: at this point, you also need to install TV firmware if you are using one of the following TV tuners:
- a Hauppauge DVB TV tuner in Europe, Australia or New Zealand (example: WinTV-soloHD, WinTV-dualHD, WinTV-quadHD, WinTV-HVR-5525, Starburst 2, etc.)
- 461e or WinTV-NOVA-S2
- WinTV-quadHD USB for North America
To download and install Hauppauge TV tuner firmware, run this command:
sudo apt-get install linux-firmware-hauppauge
Close Terminal and restart your computer.
You can now connect your Hauppauge WinTV TV tuner to your computer and it should be available for use by your Linux TV watching application.
Notes:
GIT
If you'd like to see the latest directions from the GIT repository, click here
This support is for Plex running under Ubuntu
Plex and Hauppauge TV tuners: get live HD TV on your Plex Media PC!
Our PPA supports the following Ubuntu versions:
- 16.04 Xenial with kernel 4.4
- 17.10 Artful with kernel 4.13
- 18.04 Bionic with kernel 4.15
Xenial available here http://old-releases.ubuntu.com/releases/16.04.1/.
We do not currently support LTS Enablement Stacks under Ubuntu Linux 16.04.2 Xenial. For more information about LTS Enablement Stack please visit this page https://wiki.ubuntu.com/Kernel/LTSEnablementStack
nVidia Shield and Plex with the Hauppauge WinTV-dualHD
You can use the Hauppauge WinTV-dualHD (North America, Europe, Australia and New Zealand) on the nVidia Shield for live TV in Plex. You will need the latest version of nVidia Shield firmware (5.2 or later).
Setting up Plex TV with a Hauppauge TV tuner on the NVidia Shield
Here are some ideas on cord cutting from the nVidia blog.
The Hauppauge PPA
Hauppauge has created a PPA to simplify adding TV tuner drivers into Linux. Using the Hauppauge PPA will allow easier installation of Plex with Hauppauge TV tuners. The current Hauppauge PPA has support for the following tuners:
- WinTV-HVR-955Q for North America: single tuner
- WinTV-soloHD for Europe/Australia/New Zealand: single tuner
- WinTV-dualHD for North America, Europe and Australia/New Zealand: dual tuner
- WinTV-quadHD for North America, Europe and Australia/New Zealand: quad tuner
nVidia Shield and Plex with the Hauppauge WinTV-dualHD
You can use the Hauppauge WinTV-dualHD on the nVidia Shield for live TV in Plex. You will need the latest version of nVidia Shield firmware (5.2 or later).
Here are some ideas on cord cutting from the nVidia blog.
Questions?
If you have any questions, you can contact Hauppauge support at: techsupport@hauppauge.com
Some NAS drives have support for Hauppauge TV tuners. While currently the WD NAS has the best Hauppauge TV tuner support, coming is support for Synology and the QNAP TS-235.
WD NAD drives
Instructions:
- Plug your Hauppauge WinTV-dualHD, WinTV-HVR-955Q or WinTV-HVR-935C into the back of a WD NAS drive (see list below for tested drives).
- Go to the WD app store and install 'TV/Media Device Drivers' on the WD NAS.
- You will need to install the Plex server, Emby or TVHeadend on the NAS drive too.
- On your client computer (examples: Windows PC, AppleTV, AndroidTV, Roku), you will need a TV watching application. If you have installed the Plex server on the NAS, you can use Plex on your Windows or Linux computer which is networked to the WD NAS drive.
Tested WD NAS drives
- WD PR2100/PR4100/EX2100/EX4100/EX2Ultra
Hauppauge technical support has been testing with the Raspberry Pi 3 and 4, which work 'out of the box' with Raspbian OS 4.19 or later with these Hauppauge TV tuners: WinTV-soloHD (Europe/ANZ), WinTV-dualHD (North America and Europe), WinTV-HVR-955Q (North America) and the 461e/WinTV-Nova-S2.
Raspian OS
Here is a video showing the installation of the
WinTV-dualHD on a Raspberry Pi 4
Click to play video
The WinTV-dualHD drivers come with the latest Raspbian OS, so all you need to do is plug your WinTV-dualHD into your RPi 3 or 4, install a TV application like Kaffeine, connect an antenna and scan for channels.
Firmware is needed for some Hauppauge TV tuners
Some Hauppauge TV tuners need additional firmware to be install on your Raspberry Pi. Here are the command lines to add Hauppauge firmware for those tuners which need it. You can load the firmware at any time, but it needs to be installed before you use the TV tuner.
Firmware install instructions for the WinTV-dualHD and WinTV-soloHD (European or Australia/New Zealand DVB only)
cd /tmp
wget https://www.hauppauge.com/linux/dvb-demod-si2168-b40-01.fw
md5sum dvb-demod-si2168-b40-01.fw # verify first couple and last couple chars match b267...8f6e
sudo cp dvb-demod-si2168-b40-01.fw /lib/firmware
Firmware install instructions for the WinTV-Nova-S2 or 461e (revision B7H9/B8H9):
cd /tmp
wget https://www.hauppauge.com/linux/dvb-demod-m88ds3103b.fw
md5sum dvb-demod-m88ds3103b.fw # verify first couple and last couple chars match 2c12...a285
sudo mv dvb-demod-m88ds3103b.fw /lib/firmware
Firmware install instructions for the 461e (revision B6H9 or earlier):
cd /tmp
wget https://github.com/OpenELEC/dvb-firmware/blob/master/firmware/dvb-demod-m88ds3103.fw?raw=true
md5sum dvb-demod-m88ds3103.fw # verify first couple and last couple chars match b310...3e03
sudo mv dvb-demod-m88ds3103.fw /lib/firmware
Firmware install instructions for the WinTV-HVR-1950
cd /tmp
wget https://www.hauppauge.com/linux/firmware_1900.fw
md5sum firmware_1900.fw # verify first couple and last couple chars
sudo cp firmware_1900.fw /lib/firmware
Use the PCTV 461e (new and old models) Satellite TV receiver with your Raspberry Pi
Click to play video
Satellite TV for your Raspberry Pi
Use the PCTV 461e (new and old models) Satellite TV receiver with your Raspberry Pi. Here is a video on how to install the drivers and how to use the 461e with Kaffeine to watch satellite TV.
www.youtube.com/watch?v=j-tpNMx-05sThe current version of OpenELEC 6.0.1 Kernel also has support out of the box for the WinTV-dualHD (both North America and European versions) plus the WinTV-HVR-955Q. All Hauppauge drivers and firmware are included as part of the OpenElec distribution, so you don't need to add the firmwer. Just plug your Hauppauge TV tuner into a USB port and fire up OpenElec.
OpenElec also includes Kodi, which you can use as your TV viewer.
OpenELEC can be downloaded from http://openelec.tv/get-openelec
Please check the OpenELEC community on how to install and run an operating system on the Raspberry Pi.
All you need to do is connect the HVR-955Q to a USB port on the Raspberry Pi.
The firmware is already included nothing else needs to be done to get the HVR-955Q detected.
Ubuntu installation video
Click here for our Ubuntu installation video
Ubuntu installation instructions for the HD PVR 2
Note: Please check on the bottom of your HD PVR 2 for the 6 digit 157xxx model number. Download the correct package for your model below.
We have tested with Live Channels version 1.14.012
Supported Hauppauge TV tuners include the WinTV-HVR-955Q and the WinTV-dualHD for North America. At this time, there are no DVB TV tuners supported in Live Channels.
Here is an installation video for Live Channels
Note: if you are getting TV video but no audio with Live Channels, most likely your video monitor is missing an AC3 decoder. With Live Channels, you need to have a video monitor connected to your Android system which has an AC3 decoder built in. Unlike Plex (which decodes AC3 and turns it into two channel audio if needed), Live Channels does not decode the AC3. If you are using a video monitor which does not support AC3 surround sound audio, you can use a sound bar (which normally have AC3 decoders built in).
Linux support for Colossus 2 is through a user mode application. You can get the application from the link below.
Ubuntu installation video (for Colossus 2 and HD PVR 2)
Ubuntu installation instructions for the Colossus 2 and HD PVR 2
Download the Linux Colossus 2 application:
MythTV and the Colossus 2
John Poet has created Colossus 2 support for MythTV, including AC3 audio support:
Io Data Gv Usb2
https://github.com/jpoet/HauppaugeUSB/network
Pal from Snap.TV has forked the MythTV Colossus 2 support and has added support for analog PAL composite video.
Use Kaffeine to watch live TV on your Linux system with a Hauppauge WinTV TV tuner