KEL-TEC GEN2 SUB2000 GLOCK 17 9MM RIFLE, BLACK Model: Gen 2 Sub-2000 Series: Glock 17 Caliber: 9mm (9x19mm) Weight (unloaded): 4.25 lbs Overall Length: 30.5 Inches Length Collapsed: 29.25 Inches Length Folded: 16.25 Inches Barrel Length: 16.25 Inches Barrel Finish: Matte Blue Twist Rate: 1:10. Feb 14, 2014 Enclosed are a listing of the 15x Modifications made to my 9mm Sub 2000 (Glock 17 Mag style). The intent of the thread is to outline the mod and provide opinion on the value of the item. An over-grip cover, Provides better trigger hand/finger placement while gripping gun. Surefire light. Use non-shooting hand thumb to activate.
Just got done moding out my 9mm Glock 19 Subbie a few days ago and thought I'd post it here to show it off a little
The Lake Co. gun show this past weekend helped with some final parts I needed to (pretty much) complete it . Only thing I need now is the Kel-Tec sling and the Tacticool Products operating handle cover and she'll be 100% finished (hopefully! )
Before:
And after:
Parts used:
+ 6 universal quad rails - $10 ea.
+ 15 UTG rail covers (some cut to size) - $15
+ 3/4' riser - $25
+ 4 3/4' barrel shroud (originally made for Hi-Point 995 carbine) - $50
+ Sightron S33 4-Recticle red dot - $200
+ Itac Defense laser/light combo. - $189
Kinda funny cause I bought the 6 quad rails and mounted them and then went on the Kel-Tec Owners Group forum and found out they just came out with a quad rail for the Sub . Oh well, my set-up still works well.. it's basically the same thing, except not all one piece.
Hope to get to the range soon to get it sighted in (but I need ammo first in order to do that!). May post a range report afterwards?
Anyways, any input would be appreciated.
Thanks for looking!
So Kel-Tec SUB-2000 is a really interesting gun, super compact, and it’s lots of fun shooting a PCC in 9mm. BUT, the trigger was kinda poo and overall it seems cheap. I asked M*Carbo if they’d be able to send me some trigger stuff and they sent me the whole bunch of Sub-2000 parts to review. In their care package, they sent:
- Pro Performance Curved Trigger Job Bundle
- Armourer’s Wrench
- Trigger Spring kit
- Curved aluminum trigger
- Screw and grip pin upgrade kit
- New loctite for bolt tube cover nut
- New synthetic grease
- Required 2.5mm hex keys
- Handy dandy wooden dowel
Video Review of Kel-Tec SUB-2000 Upgrades
I’ll review these in order of how much impact I felt they made to the gun.
Aftermarket SUB-2000 Trigger Springs
The SUB-2000 comes with pretty heavy springs from the factory and they contribute to a heavy, mushy trigger pull. The spring kit dropped the trigger pull from 8.5lbs to 5.25lbs, a very noticeable improvement. It’s kind of a pain in the butt to get inside a SUB-2000, so if you’re going to upgrade the trigger springs, you might as well do other mods you want to while you’ve got the guts open.
Skeletonized Charging Handle
This one surprised me because I didn’t think there was anything bad with the existing charging handle, but I was wrong. The new one is fatter and makes the heavy recoil spring feel easier to move around. I think it’s because it’s 3X wider in the middle, so I can get a better grip on it. The factory charging handle’s diameter in the middle is just slightly larger than a #2 pencil, and it’s not super ergonomic to grab. The new handle makes it a lot easier to lock the bolt to the rear.
Curved Aluminum Trigger
I’ve upgraded polymer triggers on pistols before, and aluminum just feels more solid than most polymer triggers. This aluminum trigger feels great, and it doesn’t flex at all. The lack of flexing and lower weight really contributed to a less mushy feeling trigger.
Aluminum Trigger Guard
Nothing wrong with the factory part here, but this one is more solid, doesn’t bend at all when you pull it down to release, and will put up with more abuse than the plastic one.
Bolt Tube Cover
With its straight recoil design, the SUB-2000 isn’t jumping up into your face, but the metal bolt tube isn’t super nice to put your face on in -30 weather, and when I pressed my face right up to it, I’d catch my beard hair in between the buttstock and tube. The M*Carbo rubber bolt tube cover covers the gap that would pinch my beard hair, score! Note: this cover must be cut to length depending how far out you want the buttstock. I’m tall, so extended all the way was fine for me, but if you prefer the butt in a little bit more, you’ll have to cut the cover at one of the premarked lines.
Extended Magazine Release
I had absolutely no issue with the factory mag release, but those with shorter thumbs will appreciate the extended mag release. It is slightly easier to depress since it’s a larger surface and it feels less cheap than the factory one.
Kel-tec Sub 2000 Gen 2 Accessories And Mods
Screws and Grip Pin Upgrade
Factory Kel Tecs use metal screws screwed into aluminum pins. I’ve seen some Kel-Tecs with loose screws that won’t tighten because they’ve been over-torqued on the aluminum and they’re stripped. The upgrade kit uses steel pins and screws and is more about peace of mind and long term durability with disassembly.
Kel-tec Sub 2000 G2 Accessories And Mods
Conclusion
Kel Tec Sub 2000 Modded
Gen 2 of the Sub-2000 is a lot better than Gen 1 and they upgraded a lot of smart parts, but these M*Carbo parts really round out the Gen2 to a very decent PCC. The trigger is MUCH better, the charging handle is easier to grab, and the stock doesn’t steal beard hair. For a bit more, it really makes the gun a better shooter and in my mind, is a vastly improved gun afterwards.